ACCESSORY METER > ON-VEHICLE INSPECTION |
| 1. INSPECT ACCESSORY METER ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 12 (E) - Body ground | Always | Below 1 Ω |
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 22 (ACC) - Body ground | Ignition switch OFF | Below 1 V |
| Ignition switch ACC | 10 to 14 V | |
| 24 (+B) - Body ground | Always | 10 to 14 V |