Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP ECU

FUEL PUMP ECU > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP ECU


    A237720E01
  1. Install the fuel pump ECU with the nut.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }

    NOTICE:
    Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.

  1. Connect the fuel pump ECU connector.

    1. Connect the fuel pump ECU connector.*1

    2. Rotate the lever in the direction of the arrow until a "click" sound is heard.*2