Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT DIMMER RELAY

HEADLIGHT DIMMER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. REMOVE HEADLIGHT DIMMER RELAY (DIM)


    E145696
  1. Remove the dimmer relay from the engine room relay box.



2. INSPECT HEADLIGHT DIMMER RELAY


    A092673E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    When battery voltage is not applied to terminals 1 and 2
    10 kΩ or higher
    When battery voltage is applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the relay.



3. INSTALL HEADLIGHT DIMMER RELAY