CARGO LIGHT SWITCH > INSPECTION |
| 1. INSPECT CARGO LIGHT SWITCH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 5 (FCTY) - 9 (FLON) | Cargo light switch ON | Below 1 Ω |
| Cargo light switch DOOR | ||
| Cargo light switch OFF | 10 kΩ or higher | |
| 10 (FLMP) - 7 (E) | Cargo light switch ON | Below 1 Ω |
| Cargo light switch DOOR | 10 kΩ or higher | |
| Cargo light switch OFF |
Inspect the switch illumination.
Connect the battery's positive (+) lead to terminal 1 (ILL+) and the negative (-) lead to terminal 4 (ILL-).
Check that the door courtesy light comes on.