FUEL SENDER GAUGE ASSEMBLY > REMOVAL |
| 1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Remove the fuel suction with pump and gauge tube assembly (Click here).
| 2. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
Disconnect the connector from the fuel suction plate.
![]() |
Using a screwdriver, remove the cap from the connector.
![]() |
Detach the 2 claws and remove the cover from the connector.
![]() |
As shown in the illustration, unlatch the tabs of the 2 terminals and pull out the 2 wires (blue) from the connector.
![]() |
Detach the 2 claws and disconnect the wire harness.
![]() |
Push the tab to release the lock of the fuel sender gauge, and slide the fuel sender gauge to remove it.