Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



SEAT BELT WARNING SYSTEM DESCRIPTION
If a seat belt is not fastened, this system flashes the seat belt warning light or sounds the seat belt warning buzzer as a reminder.
  1. Driver side seat belt warning light:
    When the driver side seat belt is not fastened with the ignition switch ON, the driver side seat belt warning light on the meter comes on to inform the driver. The center airbag sensor detects the driver side seat belt status and sends signals to the meter ECU using CAN.

  2. Front passenger side seat belt warning light:
    When the front passenger side seat belt is not fastened with the ignition switch ON and the front passenger side seat occupied, the front passenger side seat belt warning light on the integration control and panel blinks. The integration control and panel displays the front passenger side seat belt status and whether the front passenger side seat is occupied.

  3. Seat belt warning buzzer:
    When the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver or front passenger side seat belt is not fastened, the seat belt warning buzzer in the meter ECU sounds at intervals of 1.2 seconds 5 times.


FUNCTION OF MAIN COMPONENT
The following functions are available.

Components
Function
Front seat inner belt LH (driver side buckle switch)
Informs center airbag sensor of driver side seat belt condition (fastened or unfastened)
Front seat inner belt RH (passenger side buckle switch)
Informs center airbag sensor of front passenger side seat belt condition (fastened or unfastened)
Occupant detection sensor
Informs center airbag sensor of front passenger side seat condition (occupied or unoccupied)
Driver side seat belt warning light
If driver side seat belt is unfastened and ignition switch is ON, meter ECU flashes seat belt warning light of combination meter as reminder
Front passenger side seat belt warning light
When front passenger side seat is occupied and ignition switch is ON, if front passenger side seat belt is unfastened, meter ECU flashes seat belt warning light of integration control and panel as reminder
Seat belt warning buzzer
If driver or front passenger side seat belt is unfastened and ignition switch is ON, meter ECU sounds buzzer as reminder

SYSTEM OPERATION
  1. Driver side seat belt warning light:

    1. When the driver side seat belt is not fastened with the ignition switch ON, check that the driver side seat belt warning light on the meter comes on to inform the driver.

  2. Front passenger side seat belt warning light:

    1. When the front passenger side seat belt is not fastened with the ignition switch ON and the front passenger side seat occupied, check that the front passenger side seat belt warning light on the integration control and panel blinks.