TRANSMISSION CONTROL CABLE (for Floor Shift Type) > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
![]() |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
| 2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) |
![]() |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
| 3. REMOVE COWL SIDE TRIM BOARD LH |
![]() |
Remove the clip.
Detach the 2 clips and remove the cowl side trim board.
| 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 9 clips and claw.
![]() |
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 6. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the clip.
Detach the 6 clips and remove the console panel.
w/ Trailer Towing System:
Disconnect the connector

| 7. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() |
Using a moulding remover, detach the 7 clips and remove the end panel.
except Regular Cab:
Detach the 2 wire harness clamps and disconnect the connector.
| 8. REMOVE CONSOLE BOX CARPET |
| 9. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Remove the 2 screws.
Detach the 2 wire harness clamps.
Remove the 4 bolts and rear console box.
| 10. REMOVE FRONT CONSOLE BOX |
![]() |
Remove the 2 clips.
Remove the 6 screws and front console box.
| 11. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Move the shift lever to N.
Disconnect the transmission control cable end from the shift lever.
![]() |
Remove the clip and disconnect the transmission control cable from the shift lever retainer.
![]() |
Remove the nut and clip, and disconnect the transmission control cable from the automatic transmission.
![]() |
Remove the nut and disconnect the transmission control cable support.
![]() |
Remove the 2 bolts and then pull the transmission control cable into the vehicle to remove it.