Home › BODY › ENGINE HOOD / DOOR › HOOD SUPPORT

HOOD SUPPORT > REMOVAL

for Preparation Click here



1. REMOVE HOOD SUPPORT ASSEMBLY LH


    B167795
  1. Using a screwdriver, remove the hood support assembly while releasing the 2 clips.

    HINT:
    Tape the screwdriver tip before use.

    CAUTION:
    Remove the hood support while supporting the hood by hand.



2. REMOVE NO. 1 HOOD SUPPORT BOLT


    B166971
  1. Remove the hood support bolt.

    CAUTION:
    Remove the hood support bolt while supporting the hood by hand.