HOOD > ADJUSTMENT |

| 1. ADJUST HOOD SUB-ASSEMBLY |
![]() |
Adjust the hood's position.
Loosen the hood's 4 hinge bolts.
Move the hood and adjust the clearance between the hood and front fender.
Tighten the hood's 4 hinge bolts after the adjustment.
![]() |
Adjust the cushion rubber so that the height of the hood and fender are aligned.
Adjust the hood lock.
![]() |
Using a screwdriver, remove the hood lock nut cap as shown in the illustration.
![]() |
Loosen the 2 bolts and hood lock nut.
Adjust the hood lock position so that the striker can enter it smoothly.
Tighten the bolts and nut after the adjustment.
Install a new cap.