DOOR CONTROL RECEIVER (for Regular Cab) > REMOVAL |
| 1. REMOVE UPPER BACK PANEL GARNISH |
![]() |
Detach the 10 clips and remove the upper back panel garnish.
| 2. REMOVE LUGGAGE COMPARTMENT BOX LH |
![]() |
Remove the 2 clips.
Detach the 3 claws and remove the luggage compartment box.
| 3. REMOVE LUGGAGE COMPARTMENT BOX RH |
![]() |
Remove the 4 clips and luggage compartment box.
| 4. REMOVE FRONT DOOR SCUFF PLATE RH |
Remove the front door scuff plate .
| 5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
| 6. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH |
![]() |
Detach the 2 claws and remove the cover.
![]() |
Loosen the bolt and disconnect the outer lap belt anchor.
![]() |
Detach the 8 clips and remove the lower quarter trim panel.
| 7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH |
| 8. REMOVE DOOR CONTROL RECEIVER |
![]() |
Disconnect the door control receiver connector.
Remove the bolt and receiver.