Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET (for Floor Shift Type)

POWER OUTLET SOCKET (for Floor Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Detach the 12 clips and remove the console panel.



3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.



  1. w/ Trailer Towing System:
    Disconnect the connector


    B171298



4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B161747
  1. Detach the 4 clips and remove the finish panel.

  1. Disconnect the connectors.



5. REMOVE POWER OUTLET SOCKET ASSEMBLY


B165975E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



6. REMOVE POWER OUTLET SOCKET COVER


B165976E01
  1. Detach the 2 claws and remove the power outlet socket cover.