Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET (for Column Shift Type)

CENTER POWER OUTLET SOCKET (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
  1. Remove the front seat LH (Click here).



2. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)

HINT:
Use the same procedures described for the LH side.



3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
  1. Remove the front seat LH (Click here).



4. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)

HINT:
Use the same procedures described for the LH side.



5. REMOVE CENTER FRONT SEAT ASSEMBLY
  1. Remove the center front seat (Click here).



6. REMOVE POWER OUTLET SOCKET ASSEMBLY


B166902E01
  1. Disconnect the power outlet socket connector.

  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



7. REMOVE POWER OUTLET SOCKET COVER


B165428E01
  1. Detach the 2 claws and remove the power outlet socket cover.



8. REMOVE CENTER SEATBACK PANEL (for Double Cab)


B165566
  1. Detach the 4 claws and 4 clips, and remove the center seatback panel.



    B166347
  1. for Double Cab:

    1. Remove the 2 screws.

    2. Detach the 4 clips and remove the center seatback panel.

    3. Disconnect the power outlet socket connector.



    B169093
  1. for CrewMax:

    1. Detach the 4 claws and 4 clips, and remove the center seatback panel.

    2. Disconnect the 2 connectors.



9. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)


B166901E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



10. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab)


B165426E01
  1. Detach the 2 claws and remove the power outlet socket cover.