Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET (for Column Shift Type)

POWER OUTLET SOCKET (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab)


B165841
  1. Detach the 6 claws and 3 clips, and remove the front door scuff plate.



2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)


B165843
  1. Detach the 6 claws and 3 clips, and remove the front door scuff plate.



3. REMOVE COWL SIDE TRIM BOARD LH


B165704
  1. Remove the clip.

  1. Detach the 2 clips and remove the cowl side trim board.



4. REMOVE INSTRUMENT SIDE PANEL LH


    B226739
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B226740
  1. Remove the hood lock control lever.

  1. Remove the 2 bolts.

  1. Detach the 9 clips and claw.



    B163883
  1. for Automatic Air Conditioning System:
    Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



6. REMOVE CENTER LOWER INSTRUMENT COVER


  1. Remove the 2 clips and cover.


    B171284E01



7. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Remove the 2 screws.

  1. Detach the 4 clips.

  1. Remove the finish panel and then disconnect the connectors.



8. REMOVE POWER OUTLET SOCKET ASSEMBLY


B165981E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



9. REMOVE POWER OUTLET SOCKET COVER


B165982E01
  1. Detach the 2 claws and remove the power outlet socket cover.