STEERING PAD SWITCH > INSPECTION |
| 1. INSPECT STEERING PAD SWITCH ASSEMBLY |

Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 9 (AU2) - 8 (EAU) | No switch is pushed | 100 kΩ or higher |
| MODE switch pushed | Below 1 Ω | |
| On Hook switch pushed | 329 Ω | |
| Off Hook switch pushed | 1000 Ω | |
| Voice switch is pushed | 3110 Ω | |
| 10 (AU1) - 8 (EAU) | No switch is pushed | 100 kΩ or higher |
| Seek+ switch pushed | Below 1 Ω | |
| Seek- switch pushed | 329 Ω | |
| Volume+ switch is pushed | 1000 Ω | |
| Volume- switch is pushed | 3110 Ω |