Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    Remove the front seat RH (Click here).

  1. for Power Seat:
    Remove the front seat RH (Click here).



4. REMOVE AUDIO AMPLIFIER COVER


B168143
  1. Detach the 3 clips and remove the cover.



5. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY


B166266
  1. Disconnect the 3 connectors.

  1. Remove the 3 bolts and amplifier.