Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for CrewMax)

REAR SEAT INNER BELT ASSEMBLY (for CrewMax) > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


B167994
  1. Install the belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    HINT:
    The rear center seat outer belt's anchor is fixed with the same bolt as the rear No. 1 seat inner belt. Therefore, connect it when installing the rear No. 1 seat inner belt.



2. INSTALL REAR SEAT INNER BELT ASSEMBLY


B167993
  1. Pass the seat belt through the seatback hole.



3. INSTALL REAR SEAT REAR CUSHION MOULDING RH


B165018E01
  1. Attach the 2 claws in the order shown in the illustration to install the moulding.

  1. Install the screw.



4. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH
  1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.



5. INSTALL REAR SEAT ASSEMBLY LH


  1. Install the seat with the 4 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



    B169120



6. CONNECT REAR SEAT INNER BELT ASSEMBLY


B168895E01
  1. Connect the seat belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.



7. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


B167992
  1. Install the belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



8. INSTALL REAR SEAT ASSEMBLY RH


B165042
  1. Install the rear seat with the 4 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    NOTICE:
    Be careful not to damage the vehicle body.