Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for CrewMax)

REAR SEAT INNER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT ASSEMBLY RH


B165042
  1. Remove the 4 bolts and rear seat.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


B167992
  1. Remove the bolt and seat belt.



3. DISCONNECT REAR SEAT INNER BELT ASSEMBLY


B168894
  1. Remove the bolt and disconnect the inner belt.



4. REMOVE REAR SEAT ASSEMBLY LH


  1. Remove the 4 bolts and seat.


    B169120



5. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH
  1. Remove the hog rings and seat cushion cover from the seat cushion pad.



6. REMOVE REAR SEAT REAR CUSHION MOULDING RH


B165015E01
  1. Remove the screw.

  1. Detach the 2 claws in the order shown in the illustration, and then remove the moulding.



7. REMOVE REAR SEAT INNER BELT ASSEMBLY


B167993
  1. Remove the belt.



8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


B167994
  1. Remove the bolt and seat belt.

    HINT:
    The rear center seat outer belt's anchor is fixed with the same bolt as the rear No. 1 seat inner belt. Therefore, it becomes disconnected when the bolt is removed.