Home › BODY ELECTRICAL › AUDIO / VISUAL › INSTRUMENT PANEL SPEAKER (for Regular Cab)

INSTRUMENT PANEL SPEAKER (for Regular Cab) > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


E146506E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    Always
    Below 1 Ω
    2 - 4
    3 - 4
    Always
    3.6 to 4.4 Ω

    If the result is not as specified, replace the speaker assembly.