DOOR CONTROL RECEIVER (for Double Cab) > INSTALLATION |
| 1. INSTALL DOOR CONTROL RECEIVER |
![]() |
Install the receiver with the bolt.
Connect the door control receiver connector.
| 2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH |
| 3. INSTALL REAR DOOR SCUFF PLATE RH |
Install rear door scuff plate .
| 4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 5. INSTALL REAR SEAT ASSEMBLY |
![]() |
Attach the 4 hooks on the back side of the seat and install it.
![]() |
Install the 6 bolts.
| 6. INSTALL SEAT FLOOR BOX |
![]() |
Attach the claw to install the seat floor box.
Install the 4 knobs.
| 7. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH |
![]() |
Attach the hooks to install the cover. Then close the cover and turn the knob.
| 8. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH |
![]() |
Attach the hooks to install the cover. Then close the cover and turn the knob.
![]() |
Pull the 2 seat adjusting handles and fold down the seat cushion.