DOOR CONTROL RECEIVER (for CrewMax) > INSTALLATION |
| 1. INSTALL DOOR CONTROL RECEIVER |
![]() |
Install the receiver with the bolt.
Connect the door control receiver connector.
| 2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH |
![]() |
Attach the 3 clips to install the lower quarter trim panel.
![]() |
Connect the outer lap belt anchor with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 4. INSTALL REAR DOOR SCUFF PLATE RH |
![]() |
Attach the 8 claws and 2 clips to install the scuff plate.
| 5. INSTALL BACK PANEL TRIM RH |
![]() |
Attach the 8 clips to install the back panel trim.
Install the package holder net hook.