Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for CrewMax)

DOOR CONTROL RECEIVER (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE BACK PANEL TRIM RH


B169224E05
  1. Remove the package holder net hook.

  1. Detach the 8 clips and remove the back panel trim.



2. REMOVE REAR DOOR SCUFF PLATE RH


    B173408
  1. Detach the 8 claws and 2 clips, and remove the scuff plate.



3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH


4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH


B173409
  1. Detach the 2 claws and remove the cover.



    B173410
  1. Loosen the bolt and disconnect the outer lap belt anchor.



    B173407
  1. Detach the 3 clips and remove the lower quarter trim panel.



5. REMOVE DOOR CONTROL RECEIVER


B170312E01
  1. Disconnect the door control receiver connector.

  1. Remove the bolt and receiver.