Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY (for Long Type Overhead Console Box)

PERSONAL LIGHT ASSEMBLY (for Long Type Overhead Console Box) > DISASSEMBLY

for Preparation Click here


HINT:
When only replacing the room light bulbs, use the following procedures.



1. REMOVE PERSONAL LIGHT BULB


    E147655
  1. Using a screwdriver, detach the 6 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 2 personal light lenses.



    E147656
  1. Remove the 2 bulbs.