Home › BODY › WINDSHIELD / WINDOWGLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR UPPER DOOR ARMREST BASE PANEL LH


    B170781
  1. Using a screwdriver, detach the 2 clips and 5 claws, and remove the rear upper door armrest base panel.

    HINT:
    Tape the screwdriver tip before use.



    B167334
  1. Disconnect the connector.



2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B167332
  1. Detach the 2 claws and remove the regulator switch.