4WD CONTROL ECU > INSTALLATION |
| 1. INSTALL 4WD CONTROL ECU |
![]() |
Install the ECU with the bolt.
Connect the 2 ECU connectors.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH |
![]() |
Connect the connector.
![]() |
Attach the 3 claws to install the finish panel.
Install the 3 screws.
Install the bolt.
| 3. INSTALL INSTRUMENT SIDE PANEL RH |
![]() |
Attach the 6 claws to install the side panel.
| 4. INSTALL COWL SIDE TRIM BOARD RH |
Install the cowl side trim board RH .
| 5. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab) |
Install the front door scuff plate RH .
| 6. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax) |
Install the front door scuff plate RH .