Home › BODY ELECTRICAL › AUDIO / VISUAL › MICROPHONE AMPLIFIER

MICROPHONE AMPLIFIER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE ROOF CONSOLE BOX ASSEMBLY
  1. Remove the roof console box .



4. REMOVE MICROPHONE AMPLIFIER ASSEMBLY


B168142E01
  1. Disconnect the connector.

  1. Detach the 2 claws and clip, and remove the microphone.