TRANSFER OIL > REPLACEMENT |
| 1. DRAIN TRANSFER OIL |
![]() |
Remove the 4 bolts and lower transfer case protector.
Remove the filler plug and gasket.
Remove the drain plug and gasket, and drain the transfer oil.
| 2. ADD TRANSFER OIL |
Install a new gasket and the drain plug.
Pour oil so that the oil level is between 0 to 5.0 mm (0 to 0.197 in.) from the bottom lip of the filler plug hole.
Wait approximately 5 minutes and check that the oil level has not changed.
Install a new gasket and the filler plug.
![]() |
Install the lower transfer case protector with the 4 bolts.