HEATED OXYGEN SENSOR > REMOVAL |
| 1. REMOVE PROPELLER SHAFT HEAT INSULATOR (for 4WD) |
![]() |
Remove the 2 bolts and heat insulator from the heat insulator bracket.
| 2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
Disconnect the sensor connector.
![]() |
Using SST, remove the sensor.
| 3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
![]() |
Disconnect the heated oxygen sensor connector and 2 clamps.
Using SST, remove the sensor.