Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here



1. DISCONNECT REAR SEAT INNER BELT ASSEMBLY


B168894
  1. Remove the bolt and disconnect the inner belt.



2. REMOVE REAR SEAT ASSEMBLY LH


B165009
  1. Remove the 5 bolts and rear seat.

    NOTICE:
    Be careful not to damage the vehicle body.



3. DISCONNECT CENTER REAR SEAT OUTER BELT ASSEMBLY


B167995
  1. Remove the bolt and disconnect the seat belt anchor.

    HINT:
    The rear No. 1 seat inner belt is fixed with the same bolt as the rear center seat outer belt's anchor. Therefore, it becomes disconnected when the bolt is removed.



4. REMOVE REAR SEAT CUSHION COVER WITH PAD LH


    B165013E01
  1. Remove the hog rings and rubber bands of the seatback cover from the seat frame.



  1. Remove the bolt and seat belts.


    B165014E01

  1. Detach the hooks and remove the seat cushion cover (with pad).



5. REMOVE REAR SEATBACK BOARD LH


B165019
  1. Remove the 4 screws.

  1. Detach the 5 clips and remove the seatback board.



6. REMOVE REAR SEAT ARMREST ASSEMBLY


B165022
  1. Remove the 3 nuts and armrest.



7. REMOVE REAR SEAT HEADREST ASSEMBLY LH


8. REMOVE CENTER REAR SEAT HEADREST ASSEMBLY


9. REMOVE REAR SEAT HEADREST SUPPORT


B165020
  1. Detach the 8 claws and remove the 4 supports.



10. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


B165023
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    B165024
  1. Remove the 2 screws.



    B165025E01
  1. Disconnect the cable in the order shown in the illustration, and remove the lever.



12. REMOVE LOWER REAR SEATBACK COVER SUB-ASSEMBLY LH


B165027E01
  1. Remove the hog rings and lower cover.



13. REMOVE REAR SEATBACK COVER WITH PAD


B171578
  1. Detach the 4 claws and remove the bezel.



  1. Detach the hooks.


    B165028



  1. Remove the hog rings and the seatback cover (with pad).


    B173326E01



14. REMOVE CENTER RECLINING ADJUSTER INSIDE COVER


B165033
  1. Remove the 2 screws.

  1. Detach the hook and claw, and then remove the cover.



15. REMOVE REAR SEATBACK HINGE COVER


B165034
  1. Remove the 2 screws and cover.



16. REMOVE REAR SEAT SHOULDER BELT HOLE COVER


B168889
  1. Remove the screw and the cover.



    B168890
  1. Remove the seat belt as shown in the illustration.



17. REMOVE CENTER REAR SEAT OUTER BELT ASSEMBLY


B168891
  1. Remove the 3 nuts and belt sensor.

  1. Remove the nut and bolt, and then remove the outer belt.