Home › BODY › SEAT › REAR SEAT ASSEMBLY (for CrewMax LH Side)

REAR SEAT ASSEMBLY (for CrewMax LH Side) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the seat cushion spring and seatback frame may injure your hands.



1. REMOVE REAR SEAT CUSHION COVER WITH PAD LH


    B165013E01
  1. Remove the hog rings and rubber bands of the seatback cover from the seat frame.



  1. Remove the bolt and seat belts.


    B165014E01

  1. Detach the hooks and remove the seat cushion cover (with pad).



2. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH
  1. Remove the hog rings and seat cushion cover from the seat cushion pad.



3. REMOVE REAR SEAT CUSHION MOULDING REAR LH


B165017E01
  1. Remove the screw.

  1. Detach the 2 claws in the order shown in the illustration, and then remove the moulding.



4. REMOVE REAR SEAT CUSHION MOULDING REAR RH


B165015E01
  1. Remove the screw.

  1. Detach the 2 claws in the order shown in the illustration, and then remove the moulding.



5. REMOVE REAR SEAT INNER BELT ASSEMBLY


B167993
  1. Remove the belt.



6. REMOVE REAR SEATBACK BOARD LH


B165019
  1. Remove the 4 screws.

  1. Detach the 5 clips and remove the seatback board.



7. REMOVE REAR SEATBACK COVER


B165040
  1. Detach the 8 claws and remove the 2 covers.



8. REMOVE REAR SEAT ARMREST ASSEMBLY


B165022
  1. Remove the 3 nuts and armrest.



9. REMOVE REAR SEAT HEADREST ASSEMBLY LH


10. REMOVE CENTER REAR SEAT HEADREST ASSEMBLY


11. REMOVE REAR SEAT HEADREST SUPPORT


B165020
  1. Detach the 8 claws and remove the 4 supports.



12. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


B165023
  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.



13. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    B165024
  1. Remove the 2 screws.



    B165025E01
  1. Disconnect the cable in the order shown in the illustration, and remove the lever.



14. REMOVE LOWER REAR SEATBACK COVER SUB-ASSEMBLY LH


B165027E01
  1. Remove the hog rings and lower cover.



15. REMOVE REAR SEATBACK COVER WITH PAD LH


B171578
  1. Detach the 4 claws and remove the bezel.



  1. Detach the hooks.


    B165028



  1. Remove the hog rings and the seatback cover (with pad).


    B173326E01



16. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH
  1. Remove the hog rings and seatback cover from the seatback pad.



17. REMOVE CENTER UPPER LINK COVER


B165030E01
  1. Remove the screw.

  1. Detach the 2 claws in the order shown in the illustration, and then remove the cover.



18. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH
  1. Remove the 3 bolts.



  1. Using a T45 "TORX" socket, remove the 3 bolts and 3 bushes. Then remove the seat cushion spring.


    B165032



19. REMOVE CENTER RECLINING ADJUSTER INSIDE COVER


B165033
  1. Remove the 2 screws.

  1. Detach the hook and claw, and then remove the cover.



20. REMOVE REAR SEATBACK HINGE COVER


B165034
  1. Remove the 2 screws and cover.



21. REMOVE INNER REAR SEAT RECLINING COVER LH


B165037
  1. Remove the screw.

  1. Detach the 2 claws and remove the cover.



22. REMOVE RECLINING ADJUSTER INSIDE COVER LH


B165035
  1. Remove the 2 screws.

  1. Detach the claw and remove the cover.



23. REMOVE REAR SEAT CUSHION MOULDING LH


B165036
  1. Remove the 3 screws.

  1. Detach the 2 claws and remove the moulding.



24. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH
  1. Using a T55 "TORX" socket, remove the 2 bolts.

  1. Using a T45 "TORX" socket, remove the 3 bolts.



  1. Remove the bolt and seatback frame.


    B165038



25. REMOVE INNER REAR SEAT TRACK BRACKET COVER


B165029
  1. Remove the screw and cover.



26. REMOVE REAR SEAT CUSHION SUPPORT ASSEMBLY


B165039
  1. Remove the 6 nuts and cushion support.



27. REMOVE INNER SEAT TRACK REINFORCEMENT LH
  1. Remove the 2 bolts and reinforcement.



28. REMOVE REAR SEAT SHOULDER BELT HOLE COVER


B168889
  1. Remove the screw and the cover.



    B168890
  1. Remove the seat belt as shown in the illustration.



29. REMOVE CENTER REAR SEAT OUTER BELT ASSEMBLY


B168891
  1. Remove the 3 nuts and belt sensor.

  1. Remove the nut and bolt, and then remove the outer belt.



30. REMOVE SEAT LOCK CONTROL CABLE SUB-ASSEMBLY LH


B168934
  1. Disconnect the 2 cables and remove the control cable from the seatback frame.