Home › BODY ELECTRICAL › AUDIO / VISUAL › FLOOR SPEAKER (for CrewMax)

FLOOR SPEAKER (for CrewMax) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE BACK PANEL GARNISH RH


B169224E05
  1. Remove the package holder net hook.

  1. Detach the 8 clips and remove the back panel trim.



4. REMOVE BACK PANEL GARNISH LH
  1. Remove the package holder net hook.



  1. Detach the 8 clips and remove the back panel trim.


    B170105E05



5. REMOVE NO. 1 BOX SPEAKER ASSEMBLY


B165741
  1. Disconnect the connector.

  1. Remove the 3 bolts and box speaker.