Home › BODY ELECTRICAL › AUDIO / VISUAL › VIDEO TERMINAL (for Separate Seat Type)

VIDEO TERMINAL (for Separate Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL VIDEO TERMINAL


    B164814
  1. Attach the 4 claws to install the video terminal.



    B164815
  1. Attach the clamp to the end panel.



2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    B227980
  1. except Regular Cab:
    Attach the 2 wire harness clamps and connect the connector.

  1. Attach the 7 clips to install the end panel.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL