Home › BODY ELECTRICAL › AUDIO / VISUAL › VIDEO TERMINAL (for Bench Seat Type)

VIDEO TERMINAL (for Bench Seat Type) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE CENTER SEAT BACK PANEL


B165566
  1. Detach the 4 claws and 4 clips, and remove the center seatback panel.



    B166347
  1. for Double Cab:

    1. Remove the 2 screws.

    2. Detach the 4 clips and remove the center seatback panel.

    3. Disconnect the power outlet socket connector.



    B169093
  1. for CrewMax:

    1. Detach the 4 claws and 4 clips, and remove the center seatback panel.

    2. Disconnect the 2 connectors.



4. REMOVE NO. 1 CONSOLE BOX REGISTER ASSEMBLY


B174164
  1. Remove the 3 screws and register.



5. REMOVE NO. 2 CONSOLE BOX REGISTER ASSEMBLY


B169094
  1. Remove the 3 screws and register.



6. REMOVE VIDEO TERMINAL


    B169732
  1. Detach the clamp from the back panel.



    B171534
  1. Detach the 4 claws and remove the video terminal.