POWER OUTLET SOCKET (for CrewMax Floor Shift Type) > REMOVAL |
| 1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() |
Using a moulding remover, detach the 7 clips and remove the end panel.
except Regular Cab:
Detach the 2 wire harness clamps and disconnect the connector.
| 2. REMOVE CONSOLE BOX BEZEL |
![]() |
for AC Power Supply:
Disconnect the clamp.
Remove the 3 screws and bezel.
| 3. REMOVE REAR POWER OUTLET SOCKET (for Standard) |
![]() |
Detach the claw and remove the power outlet socket.
| 4. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard) |
![]() |
Detach the 2 claws and remove the power outlet socket cover.
| 5. REMOVE REAR POWER POINT SOCKET (for AC Power Supply) |
![]() |
Detach the 2 claws and remove the power outlet socket.