Home › BODY ELECTRICAL › OTHER SYSTEM › INVERTER MAIN SWITCH (for CrewMax)

INVERTER MAIN SWITCH (for CrewMax) > INSTALLATION

for Preparation Click here



1. INSTALL INVERTER MAIN SWITCH


    B170300E01
  1. Attach the 2 claws to install the main switch.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. for Automatic Air Conditioning System:
    Attach the 2 claws to install the sensor.



    B226740
  1. Connect the connectors.

  1. Attach the 9 clips and claw to install the finish panel.

  1. Install the 2 bolts.

  1. Install the hood lock control lever.



3. INSTALL INSTRUMENT SIDE PANEL LH


    B229058
  1. Attach the 7 claws to install the side panel.



4. INSTALL COWL SIDE TRIM BOARD LH


B165704
  1. Attach the 2 clips to install the cowl side trim board.

  1. Install the clip.



5. INSTALL FRONT DOOR SCUFF PLATE LH


B165841
  1. Attach the 6 claws and 3 clips to install the front door scuff plate.