Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor)

ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor) > REMOVAL

for Preparation Click here



1. REMOVE ROOM LIGHT ASSEMBLY


  1. w/o Rear Seat Entertainment System:

    1. Using a screwdriver, detach the 4 claws and remove the lens.

      HINT:
      Tape the screwdriver tip before use.

    2. Detach the 4 clips.



    3. Disconnect the connector and then remove the room light.


      B165836E03



    B169221
  1. w/ Rear Seat Entertainment System:

    1. Detach the 4 clips.

    2. Disconnect the connectors and then remove the room light.

      NOTICE:
      When removing the room light, be careful not to damage the shaded areas in the illustration.