Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor)

ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor) > INSTALLATION

for Preparation Click here



1. INSTALL ROOM LIGHT ASSEMBLY


  1. w/o Rear Seat Entertainment System:

    1. Connect the connector.

    2. Attach the 4 clips to install the room light.



    3. Attach the 4 claws to install the lens.


      B165837



    B169221
  1. w/ Rear Seat Entertainment System:

    1. Connect the connectors.

    2. Attach the 4 clips to install the room light.

      NOTICE:
      When installing the room light, be careful not to damage the shaded areas in the illustration.