Home
›
BODY ELECTRICAL
›
LIGHTING
›
ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor)
ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box with Rear Monitor) > DISASSEMBLY
for Preparation
Click here
HINT:
When only replacing the room light bulbs, use the following procedures.
1. REMOVE NO. 1 ROOM LIGHT BULB
Using a screwdriver, detach the 6 claws and remove the 2 room light lenses.
HINT:
Tape the screwdriver tip before use.
Remove the 2 bulbs.