POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function) > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Check for DTCs by following the directions on the Techstream screen.
| CLEAR DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Clear the DTCs by following the directions on the Techstream screen.