OIL COOLER > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug and 2 cylinder block drain cock plugs.

| *1 | Radiator Reservoir | *2 | Radiator Cap |
| *3 | Radiator Drain Cook Plug | *4 | Cylinder Block Drain Cock Plug |
Remove the radiator cap. Then drain the coolant.
Tighten the 2 cylinder block drain cock plugs.
Tighten the radiator drain cock plug by hand.
| 2. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 3 nuts and front exhaust pipe.
| 3. REMOVE HOSE HEAT PROTECTOR |
![]() |
Remove the bolt and hose heat protector.
| 4. DISCONNECT WATER BY-PASS PIPE ASSEMBLY |
![]() |
Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler, and separate the water by-pass pipe assembly.
| 5. REMOVE TRANSMISSION OIL COOLER ASSEMBLY |
![]() |
Disconnect the 2 transmission oil cooler hoses.
Remove the 2 bolts and transmission oil cooler with transmission oil cooler spacer.
![]() |
Remove the 3 bolts and separate the transmission oil cooler from the transmission oil cooler spacer.
Remove the 2 O-rings.