Home › BODY ELECTRICAL › LIGHTING › GLOVE BOX LIGHT

GLOVE BOX LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    E177527E01
  1. Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2 (+B)
    Battery negative (-) → Terminal 1 (GND)
    Light illuminates

    Text in Illustration 
    *1
    Component without harness connected
    (No. 1 Interior Illumination Light Assembly LH)
    If the result is not as specified, replace the interior illumination light assembly.