NAVIGATION SYSTEM (for DVD) > USB Audio System Recognition/Play Error |
| 1.CHECK USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the stereo jack adapter.
Check if playable files are present on the USB device or "iPod".
Check if the USB device is a compatible format or "iPod" is a compatible version.
| Result | Proceed to |
| No playable files exist, or incompatible device format or version | A |
| Playable files exist, and compatible device format or version | B |
|
| ||||
| A | ||
| ||
| 2.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK |
Delete all files in the USB device or "iPod" and format/restore it.
Save the data again and check if it can be played on the in-vehicle device.
|
| ||||
| OK | ||
| ||
| 3.REPLACE USB DEVICE OR "iPod" |
Turn the ignition switch off.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter.
| NEXT | |
| 4.CHECK USB DEVICE OR "iPod" |
Check if USB device or "iPod" is recognized by radio receiver, or if information such as track, artist and album names are displayed on screen.
|
| ||||
| OK | ||
| ||