Home › BODY ELECTRICAL › AUDIO / VISUAL › SATELLITE RADIO TUNER

SATELLITE RADIO TUNER > INSTALLATION

for Preparation Click here



1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A


    B229221
  1. Install the multi-display controller bracket A with the 2 screws.

    Torque:
    2.3 N*m{ 23 kgf*cm , 20 in.*lbf }



2. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A


    B229222
  1. Install the multi-display controller bracket A with the 2 screws.

    Torque:
    2.3 N*m{ 23 kgf*cm , 20 in.*lbf }



3. INSTALL STEREO COMPONENT TUNER ASSEMBLY


    B229220
  1. Install the stereo component tuner with the 3 nuts.

    Torque:
    8.0 N*m{ 81 kgf*cm , 70 in.*lbf }

  1. Connect the connectors.



4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH


    B230430
  1. Connect the connector.



    B226741
  1. Attach the 3 claws to install the finish panel.

  1. Install the 3 screws.

  1. Install the bolt.



5. INSTALL LOWER INSTRUMENT PANEL


    B226759
  1. Attach the 2 claws.

  1. Install the panel with the bolt and screw.



6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B226758
  1. Attach the 2 guides.

  1. Attach the 4 claws and clip to install the panel.