SATELLITE RADIO TUNER > REMOVAL |
| 1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Detach the clip and 4 claws.
Detach the 2 guides and remove the panel.
| 2. REMOVE LOWER INSTRUMENT PANEL |
![]() |
Remove the screw and bolt.
Detach the 2 claws and remove the panel.
| 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH |
![]() |
Remove the bolt.
Remove the 3 screws.
Detach the 3 claws and remove the finish panel.
![]() |
Disconnect the connector.
| 4. REMOVE STEREO COMPONENT TUNER ASSEMBLY |
![]() |
Disconnect the connectors.
Remove the 3 nuts and stereo component tuner.
| 5. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A |
![]() |
Remove the 2 screws and multi-display controller bracket A.
| 6. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A |
![]() |
Remove the 2 screws and multi-display controller bracket A.