MANIFOLD ABSOLUTE PRESSURE SENSOR > INSTALLATION |
| 1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR |
![]() |
Install a new O-ring to the manifold absolute pressure sensor.
![]() |
Install the manifold absolute pressure sensor with the screw.
Connect the manifold absolute pressure sensor connector.
| 2. INSTALL V-BANK COVER SUB-ASSEMBLY |
![]() |
Attach the 2 V-bank cover hooks to the bracket. Then align the 2 V-bank cover grommets with the 2 pins, and press down on the V-bank cover to attach the pins.