AIR FUEL RATIO SENSOR > ON-VEHICLE INSPECTION |
| 1. INSPECT AIR FUEL RATIO SENSOR |
![]() |
Disconnect the 2 sensor connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 (HA1A) - 2 (+B) (for Bank 1) | 20°C (68°F) | 1.6 to 3.2 Ω |
| 1 (HA2A) - 2 (+B) (for Bank 2) |
Reconnect the 2 sensor connectors.