Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > INSTALLATION

for Preparation Click here


HINT:
Perform "Inspection After Repairs" after replacing the mass air flow meter (Click here).



1. INSTALL MASS AIR FLOW METER
  1. Install the mass air flow meter with the 2 screws.

    Torque:
    1.7 N*m{ 17 kgf*cm , 15 in.*lbf }

    HINT:
    Perform "Inspection After Repairs" after replacing the mass air flow meter (Click here).

  1. Connect the mass air flow meter connector.