Home › BODY › WINDSHIELD / WINDOWGLASS › BACK POWER WINDOW SWITCH

BACK POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
  1. Attach the 2 claws to install the back door power window regulator switch assembly.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


  1. Connect the hood lock control cable to the hood lock control lever, rotate the hood lock control cable, and then slide and push the hood lock control cable into place.


    B355340

  1. Attach the 3 hooks to connect the hood lock control lever to the lower instrument panel finish panel sub-assembly LH.

  1. Connect each connector.



    B355338
  1. Attach the 9 clips and 2 claws to install the lower instrument panel finish panel sub-assembly LH.

  1. Install the 2 bolts <A>.



3. INSTALL LOWER CENTER INSTRUMENT COVER (for Column Shift Type)
  1. Attach the 2 guides and 2 clips to install the lower center instrument cover.

  1. Install the 2 clips.



4. INSTALL INSTRUMENT SIDE PANEL LH


    B355334
  1. Attach the 4 guides and 3 claws to install the instrument side panel LH.



5. INSTALL COWL SIDE TRIM BOARD LH
  1. Attach the 2 clips to install the cowl side trim board LH.

  1. Install the nut.



6. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Attach the 6 claws and 3 clips to install the front door scuff plate LH.