Home › TRANSMISSION · AB60E AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECM

for Preparation Click here



CHECK ECM

A107881E92

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
D74-120 (NSW) - D74-81 (E1)
L - BR
PNP switch signal
  1. Ignition switch ON
  2. Shift lever on P or N
Below 1 V
D74-120 (NSW) - D74-81 (E1)
L - BR
PNP switch signal
  1. Ignition switch ON
  2. Shift lever not on P or N
11 to 14 V
D74-2 (P) - D74-81 (E1)
G-B - BR
P shift position switch signal
  1. Ignition switch ON
  2. Shift lever on P
11 to 14 V
D74-2 (P) - D74-81 (E1)
G-B - BR
P shift position switch signal
  1. Ignition switch ON
  2. Shift lever not on P
Below 1 V
D74-26 (R) - D74-81 (E1)
L-R - BR
R shift position switch signal
  1. Ignition switch ON
  2. Shift lever on R
11 to 14 V
D74-26 (R) - D74-81 (E1)
L-R - BR
R shift position switch signal
  1. Ignition switch ON
  2. Shift lever not on R
Below 1 V
D74-25 (N) - D74-81 (E1)
G-W - BR
N shift position switch signal
  1. Ignition switch ON
  2. Shift lever on N
11 to 14 V
D74-25 (N) - D74-81 (E1)
G-W - BR
N shift position switch signal
  1. Ignition switch ON
  2. Shift lever not on N
Below 1 V
D74-27 (D) - D74-81 (E1)
G - BR
D shift position switch signal
  1. Ignition switch ON
  2. Shift lever on D
11 to 14 V
D74-27 (D) - D74-81 (E1)
G - BR
D shift position switch signal
  1. Ignition switch ON
  2. Shift lever not on D
Below 1 V
A24-25 (S) - D74-81 (E1)
Y - BR
S shift position switch signal
  1. Ignition switch ON
  2. Shift lever on S
11 to 14 V
A24-25 (S) - D74-81 (E1)
Y - BR
S shift position switch signal
  1. Ignition switch ON
  2. Shift lever not on S
Below 1 V
A24-38 (SFTU) - D74-81 (E1)
G - BR
Up-shift position switch signal
  1. Ignition switch ON
  2. Shift lever on S
11 to 14 V
A24-38 (SFTU) - D74-81 (E1)
G - BR
Up-shift position switch signal
  1. Ignition switch ON
  2. Shift lever "+" position (up-shift)
Below 1 V
A24-27 (SFTD) - D74-81 (E1)
BE - BR
Down-shift position switch signal
  1. Ignition switch ON
  2. Shift lever on S
11 to 14 V
A24-27 (SFTD) - D74-81 (E1)
BE - BR
Down-shift position switch signal
  1. Ignition switch ON
  2. Shift lever "-" position (down-shift)
Below 1 V
A24-36 (STP) - D74-81 (E1)
SB - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
A24-36 (STP) - D74-81 (E1)
SB - BR
Stop light switch signal
Brake pedal is released
Below 1.5 V
D74-7 (S1) - D74-81 (E1)
R - BR
S1 solenoid signal
1st gear
Below 1 V
D74-7 (S1) - D74-81 (E1)
R - BR
S1 solenoid signal
Not on 1st gear
11 to 14 V
D74-6 (S2) - D74-81 (E1)
W - BR
S2 solenoid signal
1st, 2nd or 6th gear
11 to 14 V
D74-6 (S2) - D74-81 (E1)
W - BR
S2 solenoid signal
3rd, 4th or 5th gear
Below 1 V
D74-3 (S3) - D74-81 (E1)
G-W - BR
S3 solenoid signal
1st, 2nd or 3rd gear
11 to 14 V
D74-3 (S3) - D74-81 (E1)
G-W - BR
S3 solenoid signal
4th, 5th or 6th gear
Below 1 V
D74-5 (S4) - D74-81 (E1)
G-R - BR
S4 solenoid signal
5th or 6th gear
11 to 14 V
D74-5 (S4) - D74-81 (E1)
G-R - BR
S4 solenoid signal
1st, 2nd, 3rd or 4th gear
Below 1 V
D74-4 (SR) - D74-81 (E1)
G - BR
SR solenoid signal
1st, 2nd, 3rd or 4th gear
11 to 14 V
D74-4 (SR) - D74-81 (E1)
G - BR
SR solenoid signal
5th or 6th gear
Below 1 V
D74-14 (SL1+) - D74-15 (SL1-)
Y - L
SL1 solenoid signal
5th or 6th gear
Pulse generation
D74-12 (SL2+) - D74-13 (SL2-)
G-R - L-W
SL2 solenoid signal
Engine is idling
Pulse generation
D74-9 (SLT+) - D74-8 (SLT-)
B - G-B
SLT solenoid signal
Engine is idling
Pulse generation
D74-10 (SLU+) - D74-11 (SLU-)
L-Y - L-R
SLU solenoid signal
5th (lock-up) gear or 6th (lock-up) gear
Pulse generation
D74-122 (THO1) - D74-98 (ETHA)
G-Y - BR
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or more
Below 1.5 V
D74-99 (THO2) - D74-98 (ETHA)
L - BR
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or more
Below 1.5 V
D74-101 (SP2+) - D74-100 (SP2-)
Y - B
Speed sensor SP2 signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 1)
D74-124 (NT+) - D74-123 (NT-)
Y - B
Speed sensor NT signal
Engine is idling
(shift lever on P or N)
Pulse generation
(see waveform 2)
A24-10 (CANH) - D74-81 (E1)
GR - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 3)
A24-11 (CANL) - D74-81 (E1)
W - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 4)
A24-51 (PWR) - D74-81 (E1)
L - BR
Tow/haul pattern select switch signal
  1. Ignition switch ON
  2. Tow/haul pattern select switch ON
0 to 1.5 V
A24-51 (PWR) - D74-81 (E1)
L - BR
Tow/haul pattern select switch signal
  1. Ignition switch ON
  2. Tow/haul pattern select switch OFF
Pulse generation*

HINT:
*: Voltage is input intermittently as this is an intermittent circuit. (Voltage varies between a peak of 7.5 to 14 V and a low of 0 to 1.5 V.)



    C161208E01
  1. Using an oscilloscope, check waveform 1.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    D74-101 (SP2+) - D74-100 (SP2-)
    2 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)



  2. C162170E01
  3. Using an oscilloscope, check waveform 2.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    D74-124 (NT+) - D74-123 (NT-)
    1 V/DIV., 2 msec./DIV.
    Engine is idling (P or N position)



  4. C161206E01
  5. Using an oscilloscope, check waveform 3.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A24-10 (CANH) - D74-81 (E1)
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON



  6. C161207E01
  7. Using an oscilloscope, check waveform 4.
    Reference: 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    A24-11 (CANL) - D74-81 (E1)
    1 V/DIV., 10 μsec./DIV.
    Ignition switch ON