POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > FAIL-SAFE CHART |
| DTC Code | Detection Item | Fail-safe |
| B2602 | Key Unlock Warning Switch Circuit Malfunction | The auto away function stops. Auto return function:
|
| B2603 | Tilt and Telescopic Manual Switch Circuit Malfunction | The tilt and telescopic operation by manual switch is suspended. |
| B2610 | Tilt Position Sensor or Tilt Motor Circuit Malfunction | The tilt operation is suspended. |
| B2611 | Telescopic Position Sensor or Telescopic Motor Circuit Malfunction | The telescopic operation is suspended. |
| B2620 | ECU Power Source Circuit Malfunction | The tilt and telescopic operation is suspended. |
| B2624 | Speed Signal Malfunction | The auto away and/or auto return function stops. |
| FAIL-SAFE FUNCTION |
If a malfunction in the tilt position sensor signal or telescopic position sensor signal occurs while operating the power tilt or power telescopic function, the tilt and telescopic ECU stops the operation of the power tilt and power telescopic steering column system.
If the power voltage to the ECU drops below approximately 8 V while operating the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.
If the tilt and telescopic ECU detects that the motor has locked during the operation of the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.
If the communication of an ECU that is related to the power tilt and power telescopic steering column system is interrupted, the system operates as shown below.
| Function | Main Body ECU Communication Interruption | Outer Mirror Control ECU Communication Interruption | Front Power Seat Control ECU and Switch LH Communication Interruption | All ECUs (*1) Communication Interruption |
| Manual | X (*2) | ○ | ○ | X (*2) |
| Automatic Away | X | X | ○ | X |
| Automatic Return | X (*3) | X (*3) | ○ | X (*3) |
| Memory | X | X | X | X |