Home › COMMUNICATION SYSTEM › MULTIPLEX COMMUNICATION › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



LIN COMMUNICATION SYSTEM DESCRIPTION
  1. The LIN communication system is used for communication between the components below.
  2. The LIN communication system has a component as a control master.
  1. Window and Sliding Roof Components that Use LIN Communication Bus (for CrewMax)

    1. Main Body ECU (Driver Side Junction Block)*1

    2. Power Window Regulator Master Switch Assembly*2

    3. Front Power Window Regulator Motor Assembly LH*2

    4. Front Power Window Regulator Motor Assembly RH*2

    5. Sliding Roof Drive Gear Sub-assembly (Sliding Roof ECU)*3

      HINT:
      1. *1: Control master
      2. *2: for Power Window Control System (w/ Jam Protection Function)
      3. *3: w/ Sliding Roof System

  2. Heater Components that Use LIN Communication

    1. Air Conditioning Amplifier Assembly*

      HINT:
      *: Control master

    2. Integration Air Conditioning Control Assembly


LIN COMMUNICATION SYSTEM DTCs
The control master component shown below outputs LIN communication system DTCs when there is a malfunction in the LIN communication. If a LIN communication stops, the control master of that part of the LIN communication system outputs DTCs.
  1. Main Body ECU (Driver Side Junction Block)